A last view into the waterproof Akkubox before I close theme…
3 Likes
Is that silver flat wires for terminals ? Sure about size vs amp ?
Yes.
I am searching long time for it.
I found only 25 meters and I bought it.
From RS Electric 
1 Like
Why go for them when copper ones can be picked up very cheap? Take a look at my build- Foxyirish Build - Ireland - #21 by Foxyirish1987 - Builds - FOIL.zone they are copper bonding/earthing links for electrical containment and can be picked up in various sizes and shapes in almost every main electrical wholesaler in Europe for very reasonable €
1 Like
I not want use such copper. I want go directly from the batteriepack to my Connector.
1 Like
Today I finished something and all fits perfectly 
Also I got my Tampra VESC. I am thinking about how I mount it. 
3 Likes
Hi there. I love your clamp with a duct not to mention how strengthened it with CF. Did you design it on your own? I will be using Flipsky 56115 200kv motor on my inflatable SUP project (not for foiling) and I am trying to figure out how to elegantly and not permanently attach motor to the fin. Secondly I would like to use a duct for my propeller to decrease risk of injury. Could you share files of your clamp and a duct? I was never drawing anything for 3D printer since I don´t have any but would like to use your files and somehow modify them so that I can clamp the motor on a fin.
Sorry for my late answer. Yes I constructed all parts from my Build. Also the Duct
I constructed theme before I got my motor, on the construction paper from Flipsky the mounting stews was in other positions like in real 
I fixed theme with manual holes.
I will fix that problem when I have time in my CAD.
At moment I have less time for my Build. But today I take little bit time to mount my aluminum plate and the top plate to the body from my technic box.
Here are the result.
Next steps cut outs the holes for the lis and the outline.
It should like looking like that:
Here I drawing the borders. Hope I do nothing wrong 
4 Likes
Beautiful and patient work.
Today I finished the outline from the top plate, drill the holes for the hinges, cut out the lid and sand all.
The next step, cfk laminating that the top plate is not deforming.
Also I decide so redesigned the Kind how I mount the Akkus.
I mount them in the middle from 3 XPS Plates.
2 Likes
Watch out for not forgetting to disconnect the lipo monitors
Thanxs that you take care for me 
I’m just saying… It already happened to someone…
5 Hours filing the 4mm Aluminiumplate because the supplier send it around 2mm longer than I ordered.
After I file a radius on it that I not damage my Inflatable when I mount my box…
2 Likes
Today I finished the top CFK Layer from my Topplate. Slowly I am learning how to laminating with CFK…
3 Likes
What core did you use?
I want finish now quick so I take a Siebdruckplatte.
In my optimation tasks I will change it to an XPS core to reduce more weight
