Very slow build from France

Hi Alexandre,
you need no trust bearing for reisenauer chief - it has double row angular contact ball bearing

image

2 Likes

Thank you,
For the tubing not sure yet if i will use 40 or 50mm , the propeller is 49mm …

Mike: yes chief has angular bearing, needle for the super chief , I am more worried for the small “clip” that hold the shaft on the bearing outside , inside the gearbox it is larger, all the trust will be on this 2mm ring clip outside if I am correct , I will take the gearbox apart to check

sorry - I’m not sure what you mean

All the load from the propeller to the shaft will go on the black clip ( with two little holes) on the bearing , this gearbox is assemble from the back , i may be wrong but i prefer that the trust goes on the frame off the gearbox and the tube , no? Airplane ok , boat ?

Don’t worry, a circlip on a 15mm axis can handle hundreds kg : http://www.civ-france.com/index.php?option=com_virtuemart&Itemid=170&category_id=105&page=shop.browse&limitstart=40&limit=30&lang=fr&vmcchk=1&Itemid=170

thank you for this , i still will use a trust bearing …

so things moved a bit, just order the takuma v100 today (1190€ :scream: )
test esc, datalogging is working (YES!!!) on my pc
remote ( for my e-skate as well) nice! 2 speed mod
got the box too , i will go with active cooling via 3 off this: https://www.ebay.fr/itm/12705-MODULE-PELTIER-TEC1-12705-THERMOELECTRIQUE-Machine-biere-VENDEUR-FRANCAIS-/222143317821

got the kingkong wifi for realtime monitoring, it is working but slow… http://www.mdhelicoptersusa.com/Hifei-King-Kong-III-Pro-WiFI-Dongle

got 8x 16000mah multistar ( good deal on them now )

and sent my first 3D stl file to print (gearbox /tubing mount) will see… this is the first time , never did cad before , took me some hours… but i am very happy

some pics:

3 Likes

Getting there! Did you use the ‘waterproof 200A’ circuit breaker for your test run? There has been talk of this circuit breaker not actually being able to the current we require. I have a similar 130A unit but not tested.

not wired yet, just test the motor and the propeller in a bathtub,i cannot hold it, push pretty hard, i need the foil to test at max power, this circuit breaker will be wired in serie between two pack of 4s 32000mah so it will see max : 16.7v and ±100A …

got it from a quality dealership on the back it is written “made in taiwan” so it may work… :roll_eyes:

they are rated for 42v max

well i am on the cooling issue, just try the peltier module , pull 3- 4A , one side cold other side hot (very hot i burn my finger), as long as you keep cold the hot side , it is working but when you stop or turn it down , the heat transfert everywhere, so i may do something wrong but i am not happy with this solution

i cut the water pipe (too small) on this esc, i don’t know if i just go with passive cooling or put this water pump

got the gearbox mount, not bad for the first time, SLS PA12

feet nice

and the foil :grin:

2 Likes

I don’t see how the Peltier is going to help here. Peltiers work by making one side cold and the other side hot. I assume that you want to stick the cold side onto the ESC. This will cool the ESC, but what happens to the hot side? The Energy there needs to be dissipated outside.

The Peletier does not really cool. It is only like a pump for thermal energy. It takes the energy on one side and moves it to the other side. That other side needs to be outside of your ESC case.

1 Like

Thanks for sharing your experiments. I like your build, because it seems to me like it will be an easy beginner foil. I might have some advice on why your peltier devices get so hot. I have not tested your specific type, but I have done some prototyping with peltier devices in other projects. Typical peltier modules have a COP < 1 for any serious amount of heat moved and a temperature difference higher than a few degrees Celsius. This means if you want to move a watt of heat from the cold to the hot side you have to use >=1W of electric power. This results in turn in at least 2W of heat to get rid of on the hot side quickly. If you can not cool the hot side enough your temperature difference will rise and your efficiency suffers. If you don‘t need to cool your esc below ambient temperature it might be easier to increase thermal transfer to ambient by larger heatsinks, active forced airflow or water cooling. I didn’t find a perfect datasheet right now to help you estimate your setup, but this example peltier datasheet I found online might give you some more ideas. You can calculate the input power from the device test graphs and compare it to the amount of heat moved. This will probably be much clearer than my description here. In any case much succes with your build and development.
Edit: @MaxMaker how can you type so fast :grinning:

1 Like

the pics show just a part of the setup , i tested with a heat sink on the hot side , 2 plates alloy 5mm 200*200 , that was supposed to be on the top of the case , and yes outside, but before i cut a hole in the case i tested and realized that the heat sink outside need to be a lot bigger and yes with the foil moving (forced airflow) it might work but when you stop, the top gets very hot and finish by heating everything, need a fan as well i guess, so the all thing will take too much place

pull 130W so i guess i needed 300w of heat dispersion on top of the case…

thrust bearing, seal inside the mount , need to work on the shaft…

1 Like

Did you manage to find a M10x1 axis or did you make it with a die?
Did you find a way so it will not unsrew?

I made mine in aluminuim, with a die, but I hesitate to loctited it to the gearbox axis or to put a little screw through both axis.

i made a couple and buy some, but it was never straight and i had some vibrations
first test (in the bathtub) i just put 2 blots (contre ecrou) on the shaft between the prop , hold about 500W
in this set up i will glue with loctite bleue, i think it will be enough, just have to wait 12H before putting load on it, and you can always unsrew it by heating

you have to look for "pas fin m10x100, utilisé en luminaire, dispo chez casto mais ils sont creux et tordu la plus part du temps, et en construction sur des sites spécialisés en structures métalliques "

i got 1meter shaft for roof construction, hard steel (same steel as the screw from the gearbox , there is a number on top of the screw) , very very hard to drill , but prefecty straight

or put a screw on gearbox or a pin : i think it s titanium, don’t think you can drill that properly

i will post the link for shaft :wink:

here for the shaft , fast shipping , good price, but it s hard steel 12.9 (same as the gearbox bolt) , not easy to drill

working on the box, i will try passive cooling with a heat sink outside, silicone up everything and will go like that for the first test…

7 Likes

Very nice & clean @Alexandre. An all-in-one-box setup worked fine for me too for short rides. Probably much better with your external heat sink. Good luck with the first test.

thank you ! yes for the first test on an inflatable board, then if i get good result i will build my own board much smaller…

1 Like

Looks good! I planned to do pretty much the same thing :yum: