I think Maytech have their motors made by reacher tech so you could probably use reacher techs motor specs as a good guide. But why buy maytechs motor for $US600 when you can get one from reacher tech for $US410.
Thanks Eileen. This first set of data is a bit disappointing.
I am not a motor specialist but the flattering 9N.m is usually given at max rpm (16380= 195x84) and max voltage (20s 84V).
So I don’t know what to expect at half this voltage value since our voltage working range is 12 to 14s (44V to 52V nominal). So it is very unlikely that we can reach the required minimum torque for a efoil use with this 195KV motor as a direct drive = W I T H O U T _ _ G E A R
So, I’m looking forward to your 160, 130 and 100KV data as the max torque increases with the KV going down…
Very exciting moment
How much did you pay for this Reacher Tech D65L150-100 therefore 100KV 6KW motor ?
What will be your working voltage and your ESC ? Any data logger ?
That looks very nice indeed! Very interested to see if it works or not. Maytech is definitely getting their motors from reacher but not at the right KV for efoil which I find quite bizarre…
If that unit works well reacher are going to get a host of orders!
I think it is the second time here that Maytech is learning while manufacturing. Then I am not sure Eileen is an Engineer. Let’s give her a chance to come up with nice figures for 130 and 100 KV motors. It is always better to have two motor sources than one hoping that MAYTECH is not just a reseller.
She’s not an engineer as I’ve asked her questions and she had to go back and ask an engineer. I think this conversation is much more constructive when we say “efoils need 100kv, no gearbox, can you make that happen?” rather than shitting on the vendors. Based on @MauiMan post they do make a 100kv looking at the picture. I doubt that uses a gearbox.
Guarantee, confidence, price, communication, fast shipping…I´m very happy with Maytech parts, ESC (300A ESC is an incredible ESC for efoil), Vesc, remotes, etc, etc and I prefer testing with this confidence. I hope you understand me.
Everyone can buy the motor they want. I will test this one and I explain very well why in my last post. I hate the discussions about price. Sometimes the price is not the only important to me.
Firstly while the price may not be important to you personally, it is very important to others which is completely fair. Hence why it always comes up.
Secondly if I watch your latest videos on YouTube, you are including maytech logo’s. This would indicate that you are either being sponsored to promote their items or are receiving some discount to do so. This puts a context on the reviews.
