Efoil V3 - STL files for Gong foil and Flipsky motor 12mm - Parts list - Schematics

no difference only the shaft

1 Like

Test new prop shape today 18A vs 23A old shape. Very nice :slight_smile: but I have some whistling

5 Likes

Great project, Congratulations

I builds an efoil with a similar setup, currently completing parts

I have a questions … is this an additional capacitor? What are the parameters?

What is the diameter of the propeller after modification

looks like a relay? 2020202020 char

1 Like

Yes it’s a relay. it’s my safety system. this relay cut the power when the rider fall.
there is a old post on the forum, where I explain for my 1st e-foil the system.
I don’t remember exacly where

1 Like

Thanks, I found it :slight_smile:

1 Like

what is the maximum speed you can reach with your board ??

1 Like
1 Like

https://flipsky.net/collections/electronic-products/products/high-current-fsesc-200a-60v-base-on-vesc6

Just to short questions I would love to get a reply for !

  1. what is the maximum speed you can reach with your board ?

  2. How many volts has your battery ?

did you not have any esc damage by cutting the power under load?

Love your setup. Great!

New ride yesterday with the new prop, lower speed
46 minutes, 18A without duct. There was 25% battery left.

3 Likes

[DavidF]
did you not have any esc damage by cutting the power under load?

=> no damage to my 3 Efoil and I have the same safety system

[Invisible]
Just to short questions I would love to get a reply for !

  1. what is the maximum speed you can reach with your board ?
    => this E-foil is not build for the speed due to a big wing, it’s build for the cruising at lower speed
    and ride a maximum time

  2. How many volts has your battery ?
    => 12S (50V) 22AH

new prop diam 132mm old 125mm

picture after sanding and painting

1 Like

Thank you, your latest post has helped me a lot and I think it is very cool how long your efoil drives with one battery charge.

That’s fine but I still want to know how fast you can be.
And do you think I could foil with a GONG WINGFOIL ALLVATOR VELOCE M when I use the same flipsky motor like you (I am 70kg)

Here my parts list E-foil V3

9 Likes

A very useful part list file that will help many beginners. A simple and safe implementation for 1500eur
At first, I didn’t understand why you had used such a long waterproof alu box (25 cm). Then I looked at the pict in post no 8. Then I understood it was to occupy a separate waterproof volume. This ESC box is really packed and I couldn’t help wondering if you had tried the natural forced flow without pump, with just the cone water inlet.

2 Likes

No I haven’t tried the natural forced flow without pump, I don’t know if it can work

E-Foil Monteynard

4 Likes