Hi,
I am un the UK and want to get some parts CnC ed like my mast clamp as i broke it twice now over tightening etc
Has anyone found a cheap place to get parts CNCnd
Anyone got any parts made from china?
I haven’t found any cheap places, but will be interesting to see if anyone else has. Where are you in the UK?
South Wales newport,Gwent
I am in Shanghai, China. I don’t know how much expensive in UK. But We may have an indicate compare. I Paid nearly 21 pounds for cnc ing one mast clamp. I also felt it is way expensive than 3D printing. I think it is reasonable cost more when single piece cnc machining. cnc is good at mass production.
£21… That’s insanely cheap to CNC the mast clamp. Here in the UK you would be looking at probably £300 for a once off!
300 pounds? Unbelievable.
I need clarification to avoid any mislead. I mark out it on following photo of my e-foil. That part impossible for the insane cost in UK. Are you sure?
Yes thats the clamp. Its about £150 per piece. Clamp is 2 pieces.
Thats a very nice foil!
I think someone in the forum recommended this company from china: China CNC Machining - Runsom Precision
I bookmarked it at the time, never ordered from them though. Might be worth even with additional shipping cost.
2 Likes
Congratulations for your nice project.
Which NAISH Thrust surf foil do you have ? L or XL ?
Size: M | Standard Mast Size: 55 cm | Aspect Ratio: 3.54 | Wingspan: 23.8"/60.5 cm | Projected Surface Area: 1,032 cm2
Size: L | Standard Mast Size: 55 cm | Aspect Ratio: 3.54 | Wingspan: 26.1"/66.2 cm | Projected Surface Area: 1,236 cm2
Size: XL | Standard Mast Size: 55 cm | Aspect Ratio: 4.75 | Wingspan: 34"/86.4 cm | Projected Surface Area: 1,572 cm2
Using a caliper, could you give me CH, TH and L in mm ? (chord, thickness)
you can get a instant quote from here there not super cheap but they are quick and have 5 axis. https://www.weerg.com/en/
1 Like
@morgansteven1970 I paid $180 USD to have the motor gearbox mount CNC machined from aluminum on 3DHubs.
Hey Jezza, That s make good sense to me, Thanks. It was wrong number. I call the rear part of the mast clamp ”tube mount rear”. And I paid £95 for it. So I paid £116 in total for the complete mast clamp. Think if including the shipping. It is not super cheap to CNC here in China, Isn’t it?
I have L and XL. the mast is exchangeable. I like XL. It works better for me.
Sure, I can do the measure for u during the weekend.
1 Like
I am looking at the photo of your first build. It looks similar to my motor assembly. What type of failure did you have. Tell me about the motor please.
Hello Marco. Nice work. I am in Shanghai next week. Where do you foil?
Greetings Toto
I got some parts CNC parts made using this company, good quality and cheap. I got a front mast clamp and a motor to gearbox adapter and it cost 138USD delivered to UK.
Here the details below if anyone interested:
SUNPE LIMITED
SUNPE PROTOTYPE(HK) CO., LIMITED
ZHONG SHAN SUNPE TECHNOLOGY Co., Ltd
Address:
No.70 Tongxing Xi Rd,Dongsheng Town, Zhongshan City, Guangdong, 528414, P.R.China
Mobile:+86-13392940070
What’s APP:008613392940070
We Chat:ellen_sunpe15
Tel.: +86 (0) 760-2222 5560 EXT 8012
Fax.: +86 (0) 760-2221 1992
Website: http://www.sunpe.com
sales.prototype.15@gmail.com
6 Likes
Hi Marco,
What is the size of your propeller ?
I am using using the Pacificmeister prop. Did try the Horwithy version 1 aswell but it not work as well not as much power
Has anybody had the Pacificmeister sealmount part CNC’d?
Yes.
1 Like